Net2 Plus - Door control centre/controller with PoE+-EV in plastic housing

Info - The Info-P series readers are suitable for Switch2 and Net2 systems. The readers are only supplied with a dark-coloured cover cap. Caps in other colours are available. These and replacement caps are available free of charge to registered installers of Paxton systems. The P-Series readers are available in four sizes.Installation - The reader connection cable is connected to the door control unit according to the colour coding. Installation is simple and can be carried out accurately.Operation - A transponder is held in the area of the reading distance. The reader forwards the read information to the door control unit. If the transponder is recognised as authorised, the green LED flashes and access is granted. The red LED flashes and access is denied if the transponder is invalid.Our P50 Mifare readers are now equipped with Genuine HID Technology®. When licensed with an activation card, the readers can read HID 125kHz proximity transponders. If required, these readers can also be activated for a Wiegand output via a separate activation card.

This layer 2/3 switch with extensive L3 functions was specially developed for applications with high data loads, such as video over IP, video streaming also in conjunction with multicast . The compact design and reduced number of ports make this switch ideal for smaller systems or as a remote unit in a larger network. With its extensive management options, can also fulfil complex network requirements. Special features for access control Component-friendly features Extra high backplane performance for smooth transmission with full port utilisation. Jumbo frames up to 9600bytes are also supported at 100MBit/s. port security through MAC address restriction. DMS DMS (Device Management System) The switch has an integrated network monitoring and control system, which gives the user a very simple overview of the entire network. This DMS system has the following features: Graphical network overview The network topology view provides a quick overview of all switches and end devices in the network, such as IP cameras or servers, with details of the IP address, device type and name. Maps and maps can be stored as background images with which the user can quickly access specific network devices even without knowledge of the IP structure. Device search This function also allows targeted access to a specific device in larger networks. Newly added devices, such as a replaced IP camera, are displayed immediately and allow the user to access immediately without knowing the IP address. Data traffic display The data traffic can be displayed graphically per port over a time axis. Error handling and security Network diagnostics between master switch and connected end devices. Protection mechanisms such as data rate limitation allow effective protection against unauthorised access. IEEE802.3ah and IEEE802.1ag provide tools for structuring networks. Technical data General properties Supply voltage 100-240VAC, 50-60Hz Power consumption Max. 25W MTBF 25°C: 595'825h 50°C: 271'556h Operating temperature 0°C to 40°C Dimensions 220 x 134 x 44mm (WxDxH) Interfaces Copper ports 10 x 10/100/1000TX, RJ45 Fibre optic ports 2 x 100/1000, SFP or 10/100/1000TX, RJ45 (Combo) We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested by us and is not guaranteed. Console ports 1 x RS232, RJ45 Network features Backplane 20 GBit/s MAC table 32k Configuration Console, Web GUI, SNMPv1, v2c and v3 PoE management Port settings Port disable/enable. Auto-negotiation 10/100/1000Mbps. Flow control disable/enable. Data rate control on each port. Max. Framesize, Power Control Port status display Display per port: speed link status, flow control status. Auto negotiation status, trunk status. Layer3 functions IPv4 and IPv6 unicast: static routing VLAN 802.1Q Tagged based VLAN, up to 255 VLAN groups, Q-in-Q, private VLAN Link Aggregation IEEE 802.3ad LACP / Static trunk, supports 18 groups of 8-port trunks or static trunk QoS Traffic classification based, Strict priority and WRR, 4-level priority for Switching - Port number - 802.1p priority- DS/TOS field in IP Packet Security SSH, SSL, 802.1X RADIUS, port security, ACL with MAC, IP, multicast and much more. User authentication with private key Multicast IGMP v1/v2/v3 snooping, up to 1024 multicast groups, source-specific multicast, IGMP proxy Topology STP, RSTP, MSTP Standards IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1d Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class ofservice IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.az Energy Efficient Ethernet Types/features RY-LGS23-10G RY-19'' bracket Pair of brackets for mounting the RY-GSP23-10G in a 19" frame Included in the scope of delivery

Info - The desktop reader is set up next to the PC. It is used to read transponders into a Net2 system and to identify transponders that have been found.Installation - Simply connect the reader to a USB port. No further cabling is required. Additional workstations can also be equipped with desktop readers. Operation - An uncoded transponder is applied to the desktop reader. This creates a new user file and the transponder number is automatically entered. The user details are entered into the file and the transponder is then issued to the user.If a transponder that has already been issued is applied to the desktop reader, the corresponding user file appears.

Info - Compact systems use a 12 V DC switching voltage as the output for a lock. This is not suitable for situations where voltage-free contacts are required to control external devices, such as shutters or 24 V locks. The control output module of the compact system is designed to be connected via this output (green/yellow wires) and to provide switched (NO/NC) de-energised contacts.Installation - The connections are colour coded to show the connections for the compact system. Simply carry out the wiring according to the label on the module.Operation - The control output can be used for switching a maximum of 40 volts DC / AC at 4 A.

The Digital Cylinder AX is the most powerful cylinder we have ever had. And it is also the most user-friendly: An ergonomic yet compact knob with visual and acoustic signalling makes it easy to operate. We have also emphasised the importance of high-quality materials. This makes the AX digital cylinder robust and durable, with consistently low operating costs. Today the Digital Cylinder AX represents the state of the art. But it also harbours the future. Because it is equipped for further progress and has the technical potential for future innovations. Digital Euro Profile Double Thumbturn Cylinder AX - Comfort: Inside is firmly engaged. Doors can therefore be opened from this side without a transponder or SmartCard. Modular length Stainless steel knobs can be removed Integrated drill protection The Digital Cylinder AX - Comfort is often used in office, flat or house entrance doors . This cylinder can only be used with the Wireless Online System.

The GatewayNode 2 for SmartIntego is an innovative solution for the seamless conversion of Ethernet signals into the 868 MHz frequency band. With this powerful device, you can optimise your smart home applications and ensure reliable communication between your devices. Main features: - Ethernet implementation: The GatewayNode 2 enables effective transmission of Ethernet data to the 868 MHz frequency, resulting in a stable connection and an improved range - Connection for external plug-in power supply: The device comes with the option of connecting an external plug-in power supply (POWER.SUPPLY.2) to increase the flexibility of the power supply. - Integrated antennas: Both the transmitting and receiving antennas are integrated on the router board, which simplifies installation and ensures a compact design. - Power over Ethernet (PoE) capable: Thanks to the support of the 802.3af standard, the GatewayNode 2 can be supplied with power via the Ethernet cable, eliminating the need for additional power connections.