Stand Alone Compact TOUCHLOCK - Keyboard - K75
Available, delivery time: Instant download
Product number:
371-210-D
Our benefits
- Backlit buttons
- 4 to 8-digit codes
- Optional blocking after 20 incorrect digits
- 3 sizes
- Up to 50 codes
- 1 to 60 seconds release time
Product information "Stand Alone Compact TOUCHLOCK - Keyboard - K75"
Info - TOUCHLOCK compact is a 1-door access control system in which the entire electronics are located in the keypad housing. Compact systems can be installed on many doors within a property.
Installation - Compact readers have a wire pair for controlling the electric strike and a wire pair for the power supply. An exit button is optionally connected to the third pair of wires. All wire pairs are routed out of the centre back of the reader. This facilitates precise installation. Programming is carried out using a programming code.
Operation - Access is granted with a valid code/PIN. Codes/PINs are changed with the programming code.
Available downloads
-
Download "Installation tips"
Installation of a compact system
-
Download "Installation tips"
Programming a TOUCHLOCK compact systems
Manufacturer information
Paxton Deutschland GmbH
Paxton Deutschland GmbH
Westhoffstr. 128
D–48159 Münster
Germany
verkauf@paxton-gmbh.de
Datasheets
Product dimensions
W75mm x H16mm x L143mm
Login
There aren't any asked questions yet.
Similar products
%
Proximity card for standalone system red - 10 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Proximity card green for standalone system - 10 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Proximity card green for standalone system - 50 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Proximity card red for standalone system - 50 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Proximity card yellow for standalone system - 10 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Proximity card yellow for standalone system - 50 pieces
Info - PROXIMITY card sets are suitable for PROXIMITY compact, Easyprox compact and Switch2 systems with PROXIMITY readers. The cards are in card folders. The intuitive principle with delete cards facilitates handling.Installation - During commissioning, the group start card of the first transponder set is used on the reader. If further transponder sets are to be stored, e.g. at a later date, the group start card of the first set is used again and then the group start card of the next set. Further functions are programmed with the programming cards of the set.Set door release time: Sets how long the door should be opened.Connect closed-circuit door opener: Only use with PROXIMITY compact and Easyprox compact. PROXIMITY compact: Using this card changes the function of the relay for the electric strike so that closed-circuit electric strikes can be connected. After using this programming card again, normally closed electric strikes can be connected again. Easyprox compact: Using this card opens the lock. Using it again closes the door.Suppress acoustic signals: The reader's acoustic signals are cancelled. If this programming card is used again, the acoustic signals are switched on again (only for compact systems).Operation - The user cards and their corresponding delete cards are in card folders. After commissioning, all user cards are immediately valid and can be issued. When a user card is issued, it is issued to the user and their name is written on the corresponding delete card. The user can now use their card. The same procedure is followed for all other users. If a missing user card is to become invalid, simply remove the corresponding delete card from the card folder and use it on the reader. This prevents misuse.
%
Stand Alone Compact Keyboard - Vandal-resistant, metal
Info - The vandal-resistant compact metal keypad is an access control system for individual doors. All the electronics are housed in the keypad casing. Compact systems can be installed on many different doors at one location. The vandal-resistant compact metal keypad offers voltage-free relay contacts. This allows gates and barriers to be opened directly without having to install additional control outputs. The backlit buttons make the device easy to use, even in low light conditions.Installation - The compact keypad has two wires that are connected to the lock and two wires that go to the power supply. If required, two additional wires are available for connection to an output button. The cable is routed centrally from the back of the keypad, which simplifies drilling and installation. All settings and codes are programmed via the keypad using the master code. The keypad also provides voltage-free relay contacts to trigger devices such as gates or barriers.Operation - Access is granted with a valid code/PIN. Codes/PINs are changed using the programming code.
%
Stand Alone Compact Proximity Reader - P38
Info - Compact is an access control system for one door. All the electronics are located in the reader housing. Compact systems can be installed on many doors in one location, all using the same tokens.P-Series readers are supplied with black covers only. Replacement bezels are available in black and white/grey and can be ordered free of charge by Paxton registered installers via the Paxton Portal free of charge.Installation - The compact reader has two wires connected to the lock and two wires connected to the power supply. There are two wires for connection to an output button if required. The cable exits from the centre of the back of the reader, which makes drilling and mounting very precise.Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. After installation, place the registration card in front of the reader. All tokens in the pack are now valid. This completes the installation.Operation - The user tokens are valid and ready for use once installation is complete. Each user token is supplied with a corresponding shadow card. When user tokens are issued, the name of the user is noted on the shadow card. If a user is to be blocked or a user token is lost, the shadow card marked with the user's name is presented to all readers on site. This simple procedure renders the user token invalid. A new user token can be issued for this user.Additional functions can be programmed with the PROXIMITY function card package. These functions include zoning, which allows you to limit access by token colour.
%
Stand Alone Compact Proximity Reader - P75
Info - The Info-P series readers are suitable for Switch2 and Net2 systems. The readers are only supplied with a dark-coloured cover cap. Caps in other colours are available. These and replacement caps are available free of charge to registered installers of Paxton systems. The P-Series readers are available in four sizes.Installation - Compact readers have one wire pair for controlling the electric strike and one wire pair for the power supply. An exit button is optionally connected to the third pair of wires. All wire pairs are routed out of the centre back of the reader. This facilitates precise installation. Installation on metal surfaces and in the immediate vicinity of other contactless readers should be avoided, as the reading range is impaired in these cases. After installation, the group start card is used and all transponders and cards from the set are immediately valid. Done!Operation - After installation, the user transponders are immediately valid and ready for use. Each user transponder is supplied with a corresponding delete card. When a user transponder is issued, it is issued to the user and the user's name is written on the corresponding delete card. If a missing user transponder is to be blocked, the corresponding delete card is simply applied to the reader. This simple process invalidates the transponder. Another transponder can then be issued to the user.Further functions are programmed with PROXIMITY programming cards for additional functions. This includes, for example, the creation of access areas.
%
Stand Alone Compact Proximity Reader - Vandal Resistant
Info - Compact readers are 1-door access control systems in which all the electronics are located in the reader housing. Compact systems can be installed on many doors within a property, using the same tokens for all doors. The cylindrical housing of the reader is inserted into a hole in the wall. This type of installation is particularly suitable for locations at risk of vandalism. Cover caps are supplied. The cover cap marks the place where the user applies the transponder. Cover caps in black and white are included in the scope of delivery. Cover caps in a range of colours are available free of charge for registered installers via the Paxton portal.Installation - The compact reader has a wire pair for controlling the electric strike and a wire pair for the power supply. An exit button can optionally be connected to the third pair of wires.Operation - After installation and commissioning, the user transponders are immediately valid and can be issued. When a user transponder is issued, it is issued to the user and the user's name is written on the corresponding cancellation card. If a missing user transponder is to be blocked, the corresponding cancellation token is simply removed from the token folder and attached to the reader. This prevents misuse. A new transponder can then be issued to the user.Further functions are programmed with PROXIMITY programming cards for additional functions. This includes, for example, the creation of access areas.
%
Stand Alone Compact TOUCHLOCK - Keyboard - K50
Info - TOUCHLOCK Compact is a 1-door access control system in which all the electronics are located in the keypad housing. The K series keypads are supplied with black covers only, which can be fitted in the final stage of installation. Replacement bezels are available in black and white/grey and can be obtained free of charge by Paxton registered installers via the Paxtonportal .Installation - Compact keypads have a wire pair for controlling the electric strike and a wire pair for the power supply. An exit button is optionally connected to the third pair of wires. All wire pairs are routed out of the centre back of the reader. This facilitates precise installation. Programming is carried out using a programming code. The K series keypads have 2 wires that can be connected to a signalling device that acts as a doorbell when the "bell button" is pressed.Operation - Access is granted with a valid code/PIN. Codes/PINs are changed with the programming code.
%
Stand Alone Compact TOUCHLOCK - Keyboard - K50, stainless steel
Info - TOUCHLOCK compact is a 1-door access control system in which the entire electronics are located in the keypad housing. Compact systems can be installed on many doors within a property.Installation - Compact readers have a wire pair for controlling the electric strike and a wire pair for the power supply. An exit button is optionally connected to the third pair of wires. All wire pairs are routed out of the centre back of the reader. This facilitates precise installation. Programming is carried out using a programming code.Operation - Access is granted with a valid code/PIN. Codes/PINs are changed with the programming code.