Server-Konfektionierung mit Video Management Software

This layer 2/3 switch with extensive L3 functions was specially developed for applications with high data loads, such as video over IP and video streaming, also in conjunction with multicast. The PoE allows controllers to be powered via the data cable. The compact design and reduced number of ports make this switch ideal for smaller systems or as a remote unit in a larger network. The extensive management options mean that even complex network requirements can be met.Special features for access controlActive monitoring of the components ComponentsComponents powered by the switch via PoE are continuously monitored. In the event of a camera failure, the switch automatically restarts the controller. If this is not successful, the switch sends an alarm message via SNMP. Active monitoring of the PoE power supplyIf too much power is required from the switch, e.g. due to a defective camera, the switch sends an alarm via SNMP. Active management of the PoE powerWhen the switch is started up, the individual PoE ports can be started up with a time delay to prevent the PoE power supply from being overloaded. Active increased securityAmong other things, the switch has the option of storing a private authentication key, which only allows access to management by PCs and servers that have the appropriate key. Other CyberSecurity features include MAC locking, ACL list, TACAS+Radius server compatibility, multiple user control.Other featuresExtra high backplane performance for jerk-free video transmission with full port utilisation. Jumbo frames up to 9600 bytes are also supported at 100 Mbit/s. Port security through MAC address restriction. DMSDMS (Device Management System)The switch has an integrated network monitoring and control system which gives the user a very simple overview of the entire network. This DMS system has the following features:Technical dataGeneral characteristicsSupply voltage100-240VAC, 50-60HzPower consumptionMax. 40W (without PoE) / 170W (with PoE)MTBF25°C: 590'225h40°C: 356'296hOperating temperature0°C to 40°CDimensions220 x 243 x 44mm (WxDxH)InterfacesCopper ports8 x 10/100/1000TX, PoE+, RJ45Maximum PoE power across all ports: 130WFibre optic ports2 x 100/1000, SFP or 10/100/1000TX, RJ45 (Combo)We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs from other manufacturers.Console port1 x RS232, RJ45Network features Backplane20GBit/sMAC table32kConfigurationConsole, Web GUI, SNMPv1, v2c and v3PoE managementPort settingsPort disable/enable. Auto-negotiation 10/100/1000Mbps. Flow control disable/enable. Data rate control on each port. Max. Framesize, Power ControlPort status displayDisplay per port: Speed link status, flow control status. Auto negotiation status, trunk status.Layer3 functionsIPv4 and IPv6 unicast: static routingVLAN802.1Q Tagged based VLAN, up to 255 VLAN groups, Q-in-Q, private VLANLink aggregationIEEE 802.3ad LACP / Static Trunk, supports 18 groups of 8-port trunks or static trunkQoSTraffic classification based, Strict priority and WRR, 4-level priority for switching- Port number- 802.1p priority- DS/TOS field in IP packetSecuritySSH, SSL, 802.1X RADIUS, port security, ACL with MAC, IP, multicast User authentication with private keyMulticastIGMP v1/v2/v3 snooping, up to 1024 multicast groups, source-specific multicast, IGMP proxyTopologySTP, RSTP, MSTPStandards IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1d Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class ofservice IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af/at Power over Ethernet IEEE 802.az Energy Efficient Ethernet