Zuko Services DC

Licence for connecting a SimonsVoss locking component to Zuko Services DC The licence authorises the integration of a Simons Voss component into the system. A licence is required for each connected device. The following locking units can be licensed: Electronic cylinder Electronic fitting Electronic padlock The licence allows full use of the software functions for the respective component. The licence is device-related and non-transferable. It must be purchased separately for each individual locking unit. Only valid in conjunction with an existing installation of Zuko Services DC. The licence is valid exclusively for Simons Voss brand products.This licence is only required if the SimonsVoss hardware is not purchased from us.

About - The Paxton10 Handsfree key fob uses Bluetooth® wireless technology to support a handsfree range of up to 10 metres.Operation - To issue the key fob, the user's details are entered into the web-based Paxton10 software. By presenting the card to a Paxton10 desktop reader (010-387), the key fob is then added to the system.Access is authorised by holding the key fob up to the reader. The user's login details are checked and access is granted or denied according to the user's authorisations stored in the Paxton10 system.

The 13.56 MHz proximity multirange card reader offers a reliable and secure solution for encrypted data transfer via Ethernet and is suitable for use in the SimonsVoss Virtual Card Network (VCN) . With its compact and robust design, the reader is ideal for use in security-critical environments, both indoors and outdoors. SimonsVoss VCN (Paxton) compatibility:The Virtual Card Network (VCN) from SimonsVoss is an innovative, virtual network that enables locking authorisations to be managed centrally and distributed to all cards, transponders or mobile devices integrated in the system. The 13.56 MHz proximity multirange card reader integrates seamlessly into this network, ensuring user-friendly and scalable access control. The card reader supports wireless management of access authorisations through the SimonsVoss VCN system, which means that changes in access rights can be made quickly and without physically replacing keys or cards. This enables a high degree of flexibility and security in companies, building complexes or even larger organisations. Key features: - Integrated antenna for reliable and powerful reading capability.- Interfaces: Ethernet 10BASE-T/100BASE-TX for fast and encrypted data transmission.- Power supply: Power over Ethernet (PoE) to minimise installation effort.- Transponder support: Mifare- Operating modes: The card reader supports both reading and writing, which makes it ideal for applications that require both access to stored information and the storage of new data on transponders.- Area of application: The reader itself has IP40 certification, but can be operated outdoors using a special cover. The operating temperature is 0 to +50 degrees. Additional options:The card reader can optionally be used with a desktop housing, which also makes it attractive for stationary applications and flexible use at reception desks, security stations or access control points. With its ability to be seamlessly integrated into the SimonsVoss Virtual Card Network, this 13.56 MHz proximity multirange card reader offers a first-class solution for modern and efficient access control in demanding environments

The contactless MIFARE DESFire EV3 key fob is the ideal choice for system operators and developers looking for a reliable, interoperable and scalable solution. The fob is additionally equipped with an EM chip, which further increases its versatility and flexibility. As the second generation of the industry-leading MIFARE DESFire family, the EV3 offers superior performance and enhanced security. Thanks to its flexible architecture, it supports a variety of applications simultaneously, providing a future-proof platform for complex, multifunctional systems. The integration of the chip extends the application possibilities by supporting both MIFARE DESFire and EM-compatible applications. Whether in public transport, access control or loyalty programmes - the MIFARE DESFire EV3 sets new standards in terms of performance and security. The combination of MIFARE DESFire EV3 and EM chip makes this tag an optimal solution for applications that require high security and various functionalities.

About - The Net2 software is designed for operation on a PC with Windows operating systems. A complete list of compatible operating systems for Net2 can be foundat here. It manages and documents up to 50,000 users and 1,000 doors. There are two versions of the software: Net2 Lite, free and ideal for the majority of sites, and Net2 Pro, with additional features for flexible and advanced access control.Net2 Lite includes all the features required for access control, access rights management and user documentation. Additional features include unlimited free client logins, CCTV, basic functions for the integration of intruder alarm systems and location graphics.Net2 Pro has all the features of Net2 Lite software with advanced time and attendance and timeline features, integrating time management, fire and intruder alarms with multiple alarm zones. Security locking, dual use control and card designer are useful enhancements.Net2 site management made easy with Paxton Connect Adminpaxton Connect Admin, offers simple and flexible site management for Net2 system engineers and Net2 operators. Our new app includes five features in one smart interface, allowing you and your customers to manage multiple sites from one smartphone.Installation - Setup and configuration are straightforward. The simple installation wizard guides you through the setup process. The control units are identified and named according to their serial number, with which each unit is labelled. Control units can also be given meaningful names. Each control unit is configured by the Net2 software as required.Operation - Net2 operators must be added. These are users who are authorised to manage the software. There are different authorisation levels to restrict access to certain functions. Each operator must log in to the software with a user name and password. This is logged as an event.The software is intuitive to use and even the most complex functions can be carried out easily and without training. After about two hours, you will be familiar with the operation of the software.

This layer-2 switch was specially developed for applications with high data loads, such as video over IP, video streaming and in conjunction with multicast. The PoE allows IP cameras to be powered via the data cable. With the extensive management options , even complex network requirements can be fulfilled. Special features for access control Active monitoring of the componentsComponents powered by the switch via PoE are constantly monitored. In the event of a failure, the switch automatically restarts the controller . If this is not successful, the switch sends an alarm message via SNMP. Active monitoring of the PoE supplyIf, for example, too much power is required from the switch due to a defective camera, the switch sends an alarm via SNMP. Active management of the PoE powerWhen the switch is started up, the individual PoE ports can be started up with a time delay to prevent the PoE power supply unit from being overloaded. Further video-friendly featuresExtra high backplane performance for smooth video transmission with full port utilisation. Jumbo frames up to 9600 bytes are supported even at 100 Mbit/s. Port security through MAC address restriction. Further information Special featuresPoE:PoE per port adjustable PoE per port can be switched on at different times PoE per port.Switching on and off via time table adjustable Link status check, reboot if PoE sinks do not respond DMS DMS (Data Management System)The switch has an integrated network monitoring and control system, which gives the user a good overview of the entire network in a very simple way. This DMS system has the following features: Graphical network overviewThe network topology view allows a quick overview of all switches and end devices in the network, such as IP cameras or servers, with details of the IP address, device type and designation. Plans and maps can be stored as background images , allowing the user to quickly access specific network devices even without knowledge of the IP structure. Device searchThis function makes it possible to access a specific device even in larger networks. Newly added devices, such as a replaced IP camera, are displayed immediately, and allows the user to access them immediately without knowing the IP address. Data traffic displayThe data traffic can be graphically displayed per port via a time axis. Error handling and securityNetwork diagnostics between master switch and connected end devices. Protection mechanisms such as data rate limitation allow effective protection against unauthorised access. With IEEE802.3ah and IEEE802.1ag, tools are available for structuring networks. Technical specifications General properties Supply voltage 100-240VAC, 50-60Hz Power consumption Max. 40W (without PoE) / 450W (with PoE) MTBF 25°C: 352'063h 50°C: 129'960h Operating temperature 0°C to 40°C Dimensions 442 x 211 x 44mm (WxDxH) Interfaces Copper ports 24 x 10/100/1000TX, RJ45, 24 of which with PoE+ 802.3af/at Maximum PoE power across all ports: 370W Fibre optic ports 4 x 100/1000SFP We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs from other manufacturers. Console port RS232, RJ45 Network Features Backplane 56Gbit/s MAC table 8k Configuration Console, Web GUI, SNMPv1, v2c and v3 (USM) PoE management Port settings Port disable/enable. Auto-negotiation 10/100/1000Mbps. Flow Control disable/enable. Data rate control on each port. Max. Framesize, Power Control Port status display Display per port: speed link status, flow control status. Auto negotiation status, trunk status. VLAN VLAN based on: 802.1Q Tagged, Port, Protocol, IP subnet, Private (PVE), MAC Max. 4k VLANs Q-in-Q (double tag) private VLAN Voice VLAN GARP VLAN registration protocol (option) Link aggregation IEEE 802.3ad LACP Static trunk QoS Supports 8 hardware queues Strict priority and weighted round-robin (WRR) Queue assignment based on DSCP and class of service Security SSH v1 and v2 SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch 802.1X RADIUS Port Security ACL with MAC, IP, MUlticast and many more Multicast IGMP v1/v2/v3 snooping, up to 1024 multicast groups, source-specific multicast, IGMP Proxy Topology STP, RSTP, MSTP Standards IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1d Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class ofservice IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af/at Power over Ethernet IEEE 802.az Energy Efficient Ethernet