Net2 Plus - Door control centre with a 2A power supply unit in a steel housing
Delivery time Instant download
Product number:
682-813-D
Our benefits
- Door control centre for one door at a time
- Door control centres can be used together in one object
- Diagnostic LEDs
- Net2 Plus can replace a TCP/IP interface
- Net2 Plus can also be connected via RS485
- The flash memory allows simple updates
Product information "Net2 Plus - Door control centre with a 2A power supply unit in a steel housing"
About - Net2 Plus is a network-based access control system. Such a system offers the possibility of centralised management, event notification and flexible control of user access authorisations. Each door control centre is part of the network, but can also work independently. It makes its own decisions and saves events.
The Net2 Plus door control centre is connected to the management computer with an RJ45 plug via a normal TCP/IP network. This greatly increases the flexibility of installation in buildings with LAN/WAN networks. The Net2 Plus door control centre also has an RS485 connection. This allows it to be connected to other Net2 Plus or Net2 Classic door control units via a CAT5 cable.
A Net2 Plus door control unit can also act as an interface to a LAN for an RS485 connection (daisy chain) of other Net2 Plus or Net2 Classic door control units so that they no longer require a TCP/IP interface.
Door control units are sold as an assembly, in a plastic housing or with a 2 A power supply in a plastic housing.
Installation - There is a label on the Net2 Plus door control unit that clearly shows the colour-coded connections for reader, power supply, etc. The door control centre has a relay with potential-free contacts and can therefore control electric strikes or other opening drives. Door and tamper contacts, exit buttons and local alarm devices can also be connected.
Door control centres communicate with the PC via the standard TCP/IP protocol of a LAN network. The Net2 Plus door control centre should be assigned a fixed IP address. All settings are made in the Net2 Configuration Utility.
The corresponding connections are equipped with diagnostic LEDs, which are helpful for a trouble-free installation. Terminal resistors can be switched on or off as required. External terminal resistors are not required.
Operation - All changes entered in the PC are immediately transmitted to the door control centre and stored there. When a user presents a transponder to a reader, the user is identified by the door control centre and access is granted or denied as appropriate.
Available downloads
-
Download "Installation tips"
Set up external system components via TCP/IP
Manufacturer information
Paxton Deutschland GmbH
Paxton Deutschland GmbH
Westhoffstr. 128
D–48159 Münster
Germany
verkauf@paxton-gmbh.de
Datasheets
Product dimensions
Door control centre: W116mm x H25mm x L126mm
Housing: B236mm x H80mm x L320mm
Login
There aren't any asked questions yet.
Similar products
CARDLOCK reader - metal
Product number: 409-711SC-D
Info - CARDLOCK readers are used in Switch2 and Net2 systems.Installation - The reader connection cable is connected in accordance with the labelling on the door control unit.Operation - A card is swiped through the reader. The reader forwards the read information to the door control centre. If the card is recognised as authorised, access is granted. Access is denied if the card is invalid.Note: This reader is suitable as a supplement or replacement within an existing standalone system. It is not possible to set up a new standalone system with this reader, as the Cardlock starter packs are no longer available.
Chip tape - black, 10 pieces
Product number: 698-574BL-D
Info - PROXIMITY transponders and CARDLOCK magnetic cards are used with Net2. The transponders and magnetic cards are supplied in sets of 10.We now also have self-adhesive discs that turn any card into a PROXIMITY card - very cost-effective.Installation - When transponders and cards are issued to users, the user file is processed. The transponder or card number is read in via the optional desktop reader or entered manually.Operation - Once programmed in the software, the transponder is ready for use. Simply apply the transponder to the reader, the access authorisation is determined and access is granted or denied. Paxton transponders use Hitag2 technology with proprietary encryption, which includes an authentication protocol in the form of a password exchange between the token and the reader. This provides an additional layer of security for your system.
Chip tape - silver coloured, 10 pieces
Product number: 698-574SL-D
Info - PROXIMITY transponders and CARDLOCK magnetic cards are used with Net2. The transponders and magnetic cards are supplied in sets of 10.We now also have self-adhesive discs that turn any card into a PROXIMITY card - very cost-effective.Installation - When transponders and cards are issued to users, the user file is processed. The transponder or card number is read in via the optional desktop reader or entered manually.Operation - Once programmed in the software, the transponder is ready for use. Simply apply the transponder to the reader, the access authorisation is determined and access is granted or denied. Paxton transponders use Hitag2 technology with proprietary encryption, which includes an authentication protocol in the form of a password exchange between the token and the reader. This provides an additional layer of security for your system.
Desktop reader for, Prox and magnetic stripe cards USB
Product number: 350-910-D
Info - The desktop reader is set up next to the PC. It is used to read transponders into a Net2 system and to identify transponders that have been found. Installation - Simply connect the reader to a USB port. No further cabling is required. Additional workstations can also be equipped with desktop readers.Operation - An uncoded transponder is applied to the desktop reader. This creates a new user file and the transponder number is automatically entered. The user details are entered into the file and the transponder is then issued to the user.If a transponder that has already been issued is applied to the desktop reader, the corresponding user file appears.
Entry - Audio monitor only
Product number: 337-270-D
Product info - Entry is a door intercom system for operation as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. It consists of three components that are automatically recognised during set-up - external door station, indoor monitor and door control unit.The Entry Audio Monitor is a cost-effective option in this range and supports all entry functions without exception where video is not required. The monitor can be wall-mounted or used as a desktop unit and can be used with handset (for private calls) or in hands-free mode.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.The Entry monitor - desk stand allows the Entry monitor to be conveniently positioned on a desk or table.Operation - A visitor starts a call via the bell button on the external door station. Access can then be authorised for the visitor via the audio monitor.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Entry - Audio monitor with handset only
Product number: 337-272-D
Product info - Entry is a door intercom system for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. It consists of three components that are automatically recognised during set-up - external door station, indoor monitor and door control unit.The Entry Audio Monitor is a cost-effective option in this range and supports all entry functions without exception where video is not required. The monitor can be wall-mounted or used as a desktop unit, and can be used with handset (for private calls) or in hands-free mode.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise existing network infrastructure for easy installation. Since power and data are supplied via PoE over the same cable, a separate power supply is not required.The Entry monitor - desk stand allows the Entry monitor to be conveniently positioned on a desk or table.Operation - A visitor starts a call via the bell button on the external door station. Access can then be authorised for the visitor via the audio monitor.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Entry - Control centre
Product number: 337-727-D
Product information - The Entry control centre is the central interface between a door station and the door and supplies the monitors with data and power via PoE. The ports can also be used to extend the network of door stations and monitors using Entry extension switches or to connect the control centre to a Net2 system running Net2 v4.25 or higher.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.Operation - A visitor starts a video call via the bell button on the external door station. Access can then be granted to the visitor via the Entry Monitor with its intuitive touchscreen user interface. The indoor monitor can be used either with the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building can be authorised via PIN or code entry and/or a proximity transponder.
Entry - Extension switch
Product number: 337-773-D
Info - Entry is a door intercom that works both as a stand-alone system and together with the Paxton Net2 access control system, combining the intercom with the most important functions of Net2. Entry consists of 3 components that are automatically recognised during setup; the external door station, the indoor door intercom monitor and a door control unit.Entry is a plug-and-play solution that includes a range of possible door stations and is suitable for a variety of locations.The Net2 Entry control unit is the central interface between a door station and the door and supplies the monitors with data and power via PoE. The ports can also be used to extend the network of door stations and monitors using Net2 Entry extension switches or to connect the control unit to a Net2 system (running Net2 software V4.25 or higher).Installation - The Entry components can be easily connected using Cat5 or standard RJ45 patch cables. For easy installation, Entry can also utilise an existing network infrastructure. A separate power supply is not required thanks to PoE technology, as data and power are transmitted via the same cable.Operation - The visitor initiates a video call via the bell button on the door station. Access can now be granted via the internal Entry Monitor. This has an intuitive touchscreen user interface and can be used either via the handset for confidential calls or in hands-free mode.In conjunction with Net2 access control, access to the building can also be granted using a PIN code and/or proximity tag.
Entry - Intercom station/door station plastic, surface mounting
Product number: 337-420-D
Product info - Entry is a door intercom for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. A robust external door station for use with the Entry intercom. Available in industry standard anthracite grey (RAL7016) to blend in with the design of windows and doors in many new builds and modern homes.All Entry door stations are IPX5 certified and therefore suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Entry - Intercom station/door station, plastic, flush-mounted
Product number: 337-400-D
Product info - Entry is a door intercom for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. A robust external door station for use with the Entry intercom. Available in industry standard anthracite grey (RAL7016) to blend in with the design of windows and doors in many new builds and modern homes.All Entry door stations are IPX5 certified and therefore suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Entry - Intercom/door station plastic, weather protection surface mounting
Product number: 337-410-D
Product info - Entry is a door intercom for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. A robust external door station for use with the Entry intercom. Available in industry standard anthracite grey (RAL7016) to blend in with the design of windows and doors in many new builds and modern homes.All Entry door stations are IPX5 certified and therefore suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Entry - Intercom/door station stainless steel vandal-proof with weather protection, surface mounting
Product number: 337-510-D
Product information - Entry is a door intercom system for operation as a standalone device or in conjunction with the Net2 and Paxton10 access control solutions from Paxton. An external door station component of the Entry door intercom system. This variant of the door station can open up opportunities in locations where vandal resistance (VR) is a requirement. The VR door station has a market leading impact resistance rating of IK10 and is manufactured from marine grade stainless steel to withstand the most demanding environments.All Entry door stations are IPX5 certified, making them suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Customers also bought
Proximity reader - P38
Product number: 333-110-D
The Info-P series readers are suitable for Switch2 and Net2 systems. The readers are only supplied with a dark-coloured cover cap. Caps in other colours are available. These and replacement caps are available free of charge for registered installers of Paxton systems on the Paxton portal . The P-Series readers are available in four sizes.The majority of our Paxton readers are now equipped with Genuine HID Technology™. The readers can read HID™ 125 kHz proximity transponders when licensed with an activation card. If required, these readers can be activated for a Wiegand output via a separate activation card.Installation - The reader connection cable is connected to the door control unit according to the colour coding. Installation is simple and can be carried out accurately.Operation - A transponder is held in the area of the reading distance. The reader forwards the read information to the door control unit. If the transponder is recognised as authorised, the green LED flashes and access is granted. The red LED flashes and access is denied if the transponder is invalid.
Net2 - Desktop reader, USB
Product number: 514-326-D
Info - The desktop reader is set up next to the PC. It is used to read transponders into a Net2 system and to identify transponders that have been found.Installation - Simply connect the reader to a USB port. No further cabling is required. Additional workstations can also be equipped with desktop readers. Operation - An uncoded transponder is applied to the desktop reader. This creates a new user file and the transponder number is automatically entered. The user details are entered into the file and the transponder is then issued to the user.If a transponder that has already been issued is applied to the desktop reader, the corresponding user file appears.
Net2 Plus - Door control centre/controller, module only
Product number: 682-493-D
About - Net2 Plus is a network-based access control system. Such a system offers the possibility of centralised management, event notification and flexible control of user access authorisations. Each door control centre is part of the network, but can also work independently. It makes its own decisions and saves events.The Net2 Plus door control centre is connected to the management computer with an RJ45 plug via a normal TCP/IP network. This greatly increases the flexibility of installation in buildings with LAN/WAN networks. The Net2 Plus door control centre also has an RS485 connection. This allows it to be connected to other Net2 Plus or Net2 Classic door control units via a CAT5 cable.A Net2 Plus door control unit can also act as an interface to a LAN for an RS485 connection (daisy chain) of other Net2 Plus or Net2 Classic door control units so that they no longer require a TCP/IP interface.Door control units are sold as an assembly, in a plastic housing or with a 2 A power supply in a plastic housing. Installation - There is a label on the Net2 Plus door control unit that clearly shows the colour-coded connections for reader, power supply, etc. The door control centre has a relay with potential-free contacts and can therefore control electric strikes or other opening drives. Door and tamper contacts, exit buttons and local alarm devices can also be connected.Door control centres communicate with the PC via the standard TCP/IP protocol of a LAN network. The Net2 Plus door control centre should be assigned a fixed IP address. All settings are made in the Net2 Configuration Utility.The corresponding connections are equipped with diagnostic LEDs, which are helpful for a trouble-free installation. Terminal resistors can be switched on or off as required. External terminal resistors are not required. Operation - All changes entered in the PC are immediately transmitted to the door control centre and stored there. When a user presents a transponder to a reader, the user is identified by the door control centre and access is granted or denied as appropriate.