Entry - Premium Monitor

Product info - Entry is a door intercom for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. A robust external door station for use with the Entry intercom. Available in industry standard anthracite grey (RAL7016) to blend in with the design of windows and doors in many new builds and modern homes.All Entry door stations are IPX5 certified and therefore suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.

About – Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support for up to three Paxton10 Wireless Connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers. The Paxton10 door controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure. PoE+ – The Paxton10 PoE+ Door Controller is equipped with a built-in PoE+ splitter, with which it is possible to supply the door controller and door lock via PoE+, so no 230v connection is required at the door. We recommend using a TCP/IP network switch with PoE+ output. It is also possible to place a backup battery in the Paxton10 PoE+ Door Controller, if you want an extra backup in case of power failure, we recommend placing the switch behind a UPS. The door controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE. An intruder alarm can be integrated using the Paxton10 Alarm Connector The Paxton10 Door Controller – Plastic Enclosure provides a versatile solution for Paxton10 where centralised or low voltage power is already available. Mains and Power over Ethernet (PoE) powered options also available. This product is also available as a PCB only, without plastic enclosure. Installation – The wiring label on the Paxton10 Door Controller clearly shows colour coded connections for the readers, power supply, lock etc. The 12v output for the lock can be used to control any door, barrier or gate. Diagnostic LED’s indicate the status of the controller and its inputs and outputs. Controllers are connected directly to the network via TCP/IP. They are automatically visible in the Paxton10 software under the devices menu. Operation – Any changes made in the Paxton10 software are immediately communicated to the door controller. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.  

About - The Paxton10 Slimline reader combines multi-format technology with a compact design (48 mm wide post mount), making it a perfect fit for the Paxton10 system.Thanks to the integrated multi-format reading technology, the Paxton10 Slimline reader reads all common card and transponder types, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa and NFC.Installation - The wires of the reader are colour coded so they can be connected to the corresponding colour terminals of a Paxton10 door or video controller. It is not recommended to mount the device on metal surfaces or near other proximity readers as this may affect the reading range. The cable exit is centred at the rear of the reader, allowing for extremely precise drilling and mounting.The reader is supplied with 5 metres of cable, although a further extension is possible with Belden 8723 cable.Operation - The transponder is read by holding it up to the reader. As soon as a transponder has been read, the control unit checks the access authorisations of this user. Access is then authorised or denied accordingly.The reader also supports three Bluetooth® operating modes when using smart identification media - transponder, touch input and long-range.

About - The Paxton10 key fobs are specifically designed for use with a Paxton10 system and are available in packs of 10.Operation - The key fob is issued by entering the user details into the web-based Paxton10 software. The key fob is then added to the system by presenting it to a Paxton10 desktop reader (010-387).Access is authorised by holding the card close to the reader. The user's credentials are checked and access is granted or denied according to the authorisations stored in the Paxton10 system.

About -The Paxton10 Mini Bullet Camera - PRO Series is integrated into the Paxton Video Management Software and is suitable for a wide range of environments. Ideal for wall mounting where the surveillance cameras need to have a high deterrent effect.The powerful PRO series cameras also offer high definition 4K video recording quality and 256GB of inbuilt storage for a professional storage solution. The video is recorded on the camera's integrated SD card. However, the video recordings can also be saved on an external network drive.Use the Paxton10 Video Storage Calculatorto calculate the required storage space per camera in your Paxton10 system.All cameras in the Paxton10 CORE series are equipped with a 256 GB SD card as standard. Please note that our 5-year warranty applies to the camera, but not to the SD card as this is a consumable item.Installation - The Paxton10 cameras are equipped with the latest technology and are integrated into the Paxton video management software, so no further configuration is required. The cameras are connected directly to the network and appear in the Paxton10 software under the Devices menu item. Simply add the camera to the system and give it an appropriate camera name. No further configuration is required.Operation - The Paxton10 cameras support a range of useful video management functions, including"Live view" and video recordingVideo exportHigh speed scrubbingBookmarkingIntelligent scanMotion detectionand much more.. All Paxton10 camera models are covered by Paxton's 5-year worry-free guarantee. Installation and commissioning is also extremely simple: the plug-and-play hardware is immediately and automatically recognised by the software, so no further configuration is required.