Paxton10 - Slimline reader
Delivery time 2-3 Wochen
Product number:
010-296-D
Our benefits
- Built-in Bluetooth® wireless technology for use with smart devices, Suitable for outdoor use, Protection class IK10 and IP67, Reads Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire transponders, Three Bluetooth® range options - transponder, touch input and long-range, Capacitive wake-up and energy-saving sleep mode, Secure encrypted RS485 communication with the Paxton10 control unit
Product information "Paxton10 - Slimline reader"
About - The Paxton10 Slimline reader combines multi-format technology with a compact design (48 mm wide post mount), making it a perfect fit for the Paxton10 system.
Thanks to the integrated multi-format reading technology, the Paxton10 Slimline reader reads all common card and transponder types, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa and NFC.
Installation - The wires of the reader are colour coded so they can be connected to the corresponding colour terminals of a Paxton10 door or video controller. It is not recommended to mount the device on metal surfaces or near other proximity readers as this may affect the reading range. The cable exit is centred at the rear of the reader, allowing for extremely precise drilling and mounting.
The reader is supplied with 5 metres of cable, although a further extension is possible with Belden 8723 cable.
Operation - The transponder is read by holding it up to the reader. As soon as a transponder has been read, the control unit checks the access authorisations of this user. Access is then authorised or denied accordingly.
The reader also supports three Bluetooth® operating modes when using smart identification media - transponder, touch input and long-range.
Videos
YouTube
Available downloads
-
Download "Installation tips"
How to add a Reader
Manufacturer information
Paxton Deutschland GmbH
Paxton Deutschland GmbH
Westhoffstr. 128
D–48159 Münster
Germany
verkauf@paxton-gmbh.de
Properties "Paxton10 - Slimline reader"
| Reading method: | Bluetooth®, EM, FeliCa, HID, Mifare Classic, Mifare Desfire, NFC, PAC, Paxton Proximity |
|---|
Datasheets
Product dimensions
W49mm x H17.2mm x L104mm
Login
There aren't any asked questions yet.
Similar products
%
CARDLOCK reader - metal
Info - CARDLOCK readers are used in Switch2 and Net2 systems.Installation - The reader connection cable is connected in accordance with the labelling on the door control unit.Operation - A card is swiped through the reader. The reader forwards the read information to the door control centre. If the card is recognised as authorised, access is granted. Access is denied if the card is invalid.Note: This reader is suitable as a supplement or replacement within an existing standalone system. It is not possible to set up a new standalone system with this reader, as the Cardlock starter packs are no longer available.
%
Desktop reader for, Prox and magnetic stripe cards USB
Info - The desktop reader is set up next to the PC. It is used to read transponders into a Net2 system and to identify transponders that have been found. Installation - Simply connect the reader to a USB port. No further cabling is required. Additional workstations can also be equipped with desktop readers.Operation - An uncoded transponder is applied to the desktop reader. This creates a new user file and the transponder number is automatically entered. The user details are entered into the file and the transponder is then issued to the user.If a transponder that has already been issued is applied to the desktop reader, the corresponding user file appears.
%
Keyboard - K50
Info - Keyboards in the K series are suitable for Switch2 and Net2 systems. The keypads are supplied with a dark and light-coloured frame. Frames in other colours and for replacement are available free of charge for registered installers.Installation - The connection cable of the keypad is connected to the door control unit according to the colour marking. Installation is simple and can be carried out accurately.Operation - A code is entered. The door control centre checks the validity and grants or denies access.
%
Keyboard - K75
Info - Keyboards in the K series are suitable for Switch2 and Net2 systems. The keypads are supplied with a dark and light-coloured frame. Frames in other colours and for replacement are available free of charge for registered installers.Installation - The connection cable of the keypad is connected to the door control unit according to the colour marking. Installation is simple and can be carried out accurately.Operation - A code is entered. The door control centre checks the validity and grants or denies access.
%
Keyboard - stainless steel, K75
Info - K-series stainless steel keypads are suitable for Switch2 and Net2 systems. The keypads have a robust metal construction. K-series stainless steel keypads are available in three sizes.Installation - The keypad is wired according to the terminal designations. The cable is centred at the rear. This enables precise installation.Operation - A code/PIN is entered via the keypad. The validity of the code is checked and access is granted or denied accordingly.
%
Keyboard - vandal-resistant, metal
Info - The vandal-resistant metal keypads are suitable for Switch2 and Net2 systems. The keypads are manufactured with a cast metal housing and are supplied with a choice of mounting plates. This robust keypad is backlit so that it is easy to see even in low light conditions.Installation - The keypad connection cable is connected to the door control unit according to the colour coding. The cable is centred at the rear. A metal mounting plate is supplied so that the reader can be securely mounted. Alternatively, a housing can be used for aP installations and the cable is connected to the reader inside this housing. The keypad is connected to the mounting plate using four large safety fasteners. Appropriate tools are supplied.Operation - A code is entered. The door control centre checks the validity and grants or denies access.
%
KP75, with keypad MIFARE® in stainless steel design
Info - Keypad reader encased in metal for external use. It reads the transponders MIFARE® CSN.Installation - The reader with keypad is wired to the door control centre according to the terminal designations. The cable is centred at the rear. This facilitates precise installation. Do not mount the reader with keypad on metal surfaces or near other proximity readers, as this impairs the reading range.Operation - This reader with keypad is ideal if access is to be granted using combinations of transponder plus/or code or PIN. The door control unit checks the access authorisation and grants or denies access. If access is granted, the green LED flashes. If access is denied, the red LED flashes.MIFARE® CSN are registered trademarks of NXP B.V. and are used under licence.
%
Mifare update and programming reader for the VCN
The 13.56 MHz proximity multirange card reader offers a reliable and secure solution for encrypted data transfer via Ethernet and is suitable for use in the SimonsVoss Virtual Card Network (VCN) . With its compact and robust design, the reader is ideal for use in security-critical environments, both indoors and outdoors. SimonsVoss VCN (Paxton) compatibility:The Virtual Card Network (VCN) from SimonsVoss is an innovative, virtual network that enables locking authorisations to be managed centrally and distributed to all cards, transponders or mobile devices integrated in the system. The 13.56 MHz proximity multirange card reader integrates seamlessly into this network, ensuring user-friendly and scalable access control. The card reader supports wireless management of access authorisations through the SimonsVoss VCN system, which means that changes in access rights can be made quickly and without physically replacing keys or cards. This enables a high degree of flexibility and security in companies, building complexes or even larger organisations. Key features: - Integrated antenna for reliable and powerful reading capability.- Interfaces: Ethernet 10BASE-T/100BASE-TX for fast and encrypted data transmission.- Power supply: Power over Ethernet (PoE) to minimise installation effort.- Transponder support: ISO14443-A, ISO14443-B, ISO15693, NFC - Compatible with a wide range of access cards and devices.- Operating modes: The card reader supports both read and write, which makes it ideal for applications that require both access to stored information and the storage of new data on transponders.- Area of application: Suitable for indoor and outdoor use thanks to IP54 protection class. Additional options:The card reader can optionally be used with a desktop housing, which also makes it attractive for stationary applications and flexible use at reception desks, security stations or access control points. With its ability to be seamlessly integrated into the SimonsVoss Virtual Card Network, this 13.56 MHz proximity multirange card reader offers a first-class solution for modern and efficient access control in demanding environments.
%
Net2 - Desktop reader, USB
Info - The desktop reader is set up next to the PC. It is used to read transponders into a Net2 system and to identify transponders that have been found.Installation - Simply connect the reader to a USB port. No further cabling is required. Additional workstations can also be equipped with desktop readers. Operation - An uncoded transponder is applied to the desktop reader. This creates a new user file and the transponder number is automatically entered. The user details are entered into the file and the transponder is then issued to the user.If a transponder that has already been issued is applied to the desktop reader, the corresponding user file appears.
%
Paxton10 - Reader with keyboard
Via - The Paxton10 keypad reader supports two-step authentication in Paxton10 with PIN/code and transponder. The keypad is fully backlit and equipped with hardened silicone keys to ensure a long service life.Thanks to the integrated multi-format reading technology, the Paxton10 keypad reader reads all common card and transponder types, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa and NFC.Installation - The wires of the reader are colour coded and can be connected to the corresponding colour terminals of a Paxton10 door or video controller. It is not recommended to mount the device on metal surfaces or near other proximity readers as this may affect the reading range. The cable exit is centred at the rear of the reader, allowing for extremely precise drilling and mounting.The reader is supplied with 5 metres of cable, although a further extension is possible with Belden 8723 cable.Operation - The transponder is read by holding it up to the reader. As soon as a transponder has been read, the control unit checks the access authorisations of this user. Access is then authorised or denied accordingly.The reader also supports three Bluetooth® operating modes when using smart identification media - transponder, touch input and long range.
%
Paxton10 - Vandalism resistant reader
About - The Paxton10 VR reader is our vandal resistant model, making it the ideal choice for properties where the reader is exposed to heavy use and may be at risk of damage. The VR reader has market-leading IK10 impact resistance, is IP67 waterproof and has a robust metal bezel with four security fixings. It is designed for the most demanding environments.Thanks to integrated multi-format reading technology, the vandal-resistant Paxton10 VR reader can read all standard card and transponder types, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa and NFC.Installation - The wires of the reader are colour coded and can be connected to the corresponding colour terminals of a Paxton10 door or video controller. It is not recommended to mount the device on metal surfaces or near other proximity readers as this may affect the reading range. The cable outlet is centred at the rear of the reader, enabling extremely precise drilling and mounting.The reader is supplied with 5 metres of cable, although a further extension is possible with Belden 8723 cable.Operation - To read, the transponder is held close to the reader. When the reading process is complete, the control unit checks the access authorisations of this user. Access is then authorised or denied accordingly.The reader also supports three Bluetooth® operating modes when using so-called smart identification media - transponder, touch input and long-range.
%
Proximity long-range reader
Info - The long-range reader was specially designed for access points in car parks. Its long reading range (up to 5 metres) means that the hands-free transponder can also be read inside a vehicle. Thanks to the built-in hands-free interface, no additional antennas or induction loops need to be laid. The reader also works with vehicles of different sizes. Only one reader needs to be installed at each access point. This reader also works with PROXIMITY transponders so that users without hands-free transponders can also use it.Installation - Fix the mounting plate to the post. The cables for the power and data lines are fed through the mounting plate into the back of the reader using a gland. The reader is wired according to the label on the door control centre. The reader is also connected to a power supply. Position several readers so that their active fields do not overlap.Operation - A hands-free transponder is read if it is within the reading range of the reader. When a transponder has been read, the door control unit determines the access authorisations. Access is granted or denied accordingly. If access is granted, the green LED flashes. If it is denied, the red LED flashes.
Customers also bought
%
Paxton10 - Single-door controller, PCB only
About – Paxton10 Door Controllers
are the building blocks of the Paxton10 system. Each one provides control of a
single door and a port to allow support for up to three Paxton10 Wireless
Connectors for additional functionality. A single Paxton10 system can include
up to 1000 door controllers.
The Paxton10 door controller is a network device that
communicates over TCP/IP and can be integrated into an existing network
infrastructure.
PoE+ – The Paxton10 PoE+ Door
Controller is equipped with a built-in PoE+ splitter, with which it is possible
to supply the door controller and door lock via PoE+, so no 230v connection is
required at the door. We recommend using a TCP/IP network switch with PoE+
output. It is also possible to place a backup battery in the Paxton10 PoE+
Door Controller, if you want an extra backup in case of power failure, we
recommend placing the switch behind a UPS.
The door controller is equipped with 4 inputs, tamper, 230v
fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10
Alarm Connector.
Mains and Power over Ethernet (PoE) powered options also
available. This product is also available in a plastic enclosure.
Installation – The wiring label on
the Paxton10 Door Controller clearly shows colour coded connections for the
readers, power supply, lock etc. The 12v output for the lock can be used to
control any door, barrier or gate. Diagnostic LED’s indicate the status of the controller
and its inputs and outputs.
Controllers are connected directly to the network via
TCP/IP. They are automatically visible in the Paxton10 software under the
devices menu.
Operation – Any changes made in
the Paxton10 software are immediately communicated to the door controller. When
a user presents their token to the reader, the control unit identifies them and
permits or denies access as appropriate.
%
Entry - Premium Monitor
Product info - Entry is a door intercom system for operation as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. It consists of three components that are automatically recognised during set-up - external door station, indoor monitor and door control unit.The premium monitor features a 7" capacitive colour touchscreen, free concierge management functions and various design options. The monitor can be wall-mounted or used as a desktop unit.When used with the Entry Touch door station, the Premium Monitor supports two-way video calls and video voicemails.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. Since power and data are supplied via PoE over the same cable, a separate power supply is not required.The Entry monitor - desk stand allows the Entry monitor to be conveniently positioned on a desk or table.Operation - A visitor starts a video call via the bell button on the external door station. Access can then be granted to the visitor via the Entry Monitor with its intuitive touchscreen user interface. The monitor can be used indoors with the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
%
Entry - Intercom station/door station plastic, surface mounting
Product info - Entry is a door intercom for use as a standalone device or in conjunction with Paxton's Net2 and Paxton10 access control solutions. A robust external door station for use with the Entry intercom. Available in industry standard anthracite grey (RAL7016) to blend in with the design of windows and doors in many new builds and modern homes.All Entry door stations are IPX5 certified and therefore suitable for external use in all weather conditions.Installation - Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also utilise an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.With this door station model for surface mounting, the device is mounted directly on the wall surface and is therefore 100% accessible. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.Operation - A visitor starts a video call via the bell button on the external door station. Access can be authorised for the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.When connected to Net2, access to the building is authorised by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is authorised via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
%
Paxton10 - Single-door controller, with plastic housing
About – Paxton10 Door Controllers
are the building blocks of the Paxton10 system. Each one provides control of a
single door and a port to allow support for up to three Paxton10 Wireless
Connectors for additional functionality. A single Paxton10 system can include
up to 1000 door controllers.
The Paxton10 door controller is a network device that
communicates over TCP/IP and can be integrated into an existing network
infrastructure.
PoE+ – The Paxton10 PoE+
Door Controller is equipped with a built-in PoE+ splitter, with which it is
possible to supply the door controller and door lock via PoE+, so no 230v
connection is required at the door. We recommend using a TCP/IP network
switch with PoE+ output. It is also possible to place a backup battery in
the Paxton10 PoE+ Door Controller, if you want an extra backup in case of power
failure, we recommend placing the switch behind a UPS.
The door controller is equipped with 4 inputs, tamper, 230v
fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10
Alarm Connector
The Paxton10 Door Controller – Plastic Enclosure provides
a versatile solution for Paxton10 where centralised or low voltage power is
already available.
Mains and Power over Ethernet (PoE) powered options also
available. This product is also available as a PCB only, without plastic
enclosure.
Installation – The wiring
label on the Paxton10 Door Controller clearly shows colour coded connections
for the readers, power supply, lock etc. The 12v output for the lock can be
used to control any door, barrier or gate. Diagnostic LED’s indicate the status
of the controller and its inputs and outputs.
Controllers are connected directly to the network via
TCP/IP. They are automatically visible in the Paxton10 software under the
devices menu.
Operation – Any changes
made in the Paxton10 software are immediately communicated to the door
controller. When a user presents their token to the reader, the control unit
identifies them and permits or denies access as appropriate.
%
Paxton10 - Key fob, pack of 10
About - The Paxton10 key fobs are specifically designed for use with a Paxton10 system and are available in packs of 10.Operation - The key fob is issued by entering the user details into the web-based Paxton10 software. The key fob is then added to the system by presenting it to a Paxton10 desktop reader (010-387).Access is authorised by holding the card close to the reader. The user's credentials are checked and access is granted or denied according to the authorisations stored in the Paxton10 system.
%
Paxton10 - Mini bullet camera, PRO series
About -The Paxton10 Mini Bullet Camera - PRO Series is integrated into the Paxton Video Management Software and is suitable for a wide range of environments. Ideal for wall mounting where the surveillance cameras need to have a high deterrent effect.The powerful PRO series cameras also offer high definition 4K video recording quality and 256GB of inbuilt storage for a professional storage solution. The video is recorded on the camera's integrated SD card. However, the video recordings can also be saved on an external network drive.Use the Paxton10 Video Storage Calculatorto calculate the required storage space per camera in your Paxton10 system.All cameras in the Paxton10 CORE series are equipped with a 256 GB SD card as standard. Please note that our 5-year warranty applies to the camera, but not to the SD card as this is a consumable item.Installation - The Paxton10 cameras are equipped with the latest technology and are integrated into the Paxton video management software, so no further configuration is required. The cameras are connected directly to the network and appear in the Paxton10 software under the Devices menu item. Simply add the camera to the system and give it an appropriate camera name. No further configuration is required.Operation - The Paxton10 cameras support a range of useful video management functions, including"Live view" and video recordingVideo exportHigh speed scrubbingBookmarkingIntelligent scanMotion detectionand much more.. All Paxton10 camera models are covered by Paxton's 5-year worry-free guarantee. Installation and commissioning is also extremely simple: the plug-and-play hardware is immediately and automatically recognised by the software, so no further configuration is required.