IP and PoE multiplexer

The LO-9500-R2 is a 19" subrack for holding media converters of the types LO-9500-xy. Up to 14 media converters can be mounted in the subrack . The redundant power supply ensures high availability . The media converters are easy to install. The LO-9500-R2 is supplied with all the necessary mounting accessories. Technical specifications General properties Supply voltage Two redundant power supply units included in the scope of delivery 2 x 110 - 230VAC 50-60Hz Power consumption Max. 50W at full Equipped with 14 media converters MTBF Operating temperature -20°C to +50°C Dimensions 230 x 490 x 90mm (LxWxH) 19", 2U Weight 4 kg Types/features LO-9500-S Incl. accessories: 2 power cables 14 slide-in holders for media converters LO-9500-xy Blanking plates, 3x4 slots and 2 x 1 slot

The PD-R2 is a 2U high 19" housing with 17 slots. The enclosure provides an economical solution for low density VDSL2 LAN Extender installations where no management functions are required. Each 100M VDSL2 LAN Extender can be used as a standalone device or installed in the PD-R2 chassis. An AC power supply is built into the subrack. The built-in fan ensures that the temperatures in the rack remain within the permissible operating range . Technical data General properties Supply voltage 230VAC, IEC plug Power consumption Depending on the assignment with VDSL modems Base load: 10W Per modem: 4.5W Maximum power consumption with 17 modems: 90W MTBF Operating temperature 0°C ... 50°C Power loss 307BTU/h, at maximum occupancy Dimensions 199mm x 476mm x 88mm, (LxWxH) Weight Gross weight: 6.2kg Net weight: 5.2kg

This industrial media converter with management was specially developed for applications with high data loads, such as video over IP or video streaming. The compact design, wide temperature range and high flexibility make this media converter ideal for remote locations. The media converter has an optical SFP port with 100/1000FX and two copper ports with 10/100/1000TX, which supports PoE 802.3af/at/bt up to 90W per port and 120W. The management functions allow the PoE to be controlled, including monitoring of the connected PDs. The cables connected to can also be monitored remotely. The media converter can be easily mounted on a top-hat rail using the supplied mounting accessories. Technical data General properties Supply voltage 2 x 48-56VDC Power consumption Max. 4W, without PoE MTBF Operating temperature -40°C to +75°C Dimensions 105 x 38 x 84 (HxWxL), all dimensions without connector Weight Net 0.45 kg Interfaces Copper ports 2 x 10/100/1000TX with PoE++ Per port max. 90W Total over both ports 120W Fibre optic ports 1 x 100/1000FX SFP We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested or guaranteed by us. Network features Management Lite Management User Management LAN settings Relay alarm settings PoE Settings User Configuration Path GUI DIP Switches PoE Management Device alive check PoE power control PoE status PoE Configuration PoE Scheduling PoE status display Link speed per TX port, link speed SFP port, PoE output per port, data transmission Security FCC Class A, CE Types/features PD-BTPMC102-GE Without SFP Without power supply PoE, PoE+ and PoE++ up to 90W per port Total PoE power over both ports 120W Mounting accessories Bracket for top-hat rail mounting

This industrial media converter was specially developed for applications with high data loads, such as video over IP and video streaming. The compact design, wide temperature range and high flexibility make this media converter ideal for remote locations. Thanks to the use of SFPs with 100 or 1,000 MBit/s, the PC-MC101-GE can be connected to practically all common central switches. Thanks to the supplied mounting accessories, the media converter can be easily mounted on a top-hat rail or on a wall. Further information System notesThis media converter cannot be operated in combination with the VDSL-SFPs of the PD-VDSL-SFP series. Technical data General properties Supply voltage 12-56VDC, screw terminal Without power supply unit, must be ordered separately Power consumption 2W MTBF Operating temperature -40°C to +75°C Dimensions 59 x 36 x 50mm (WxHxD) Weight 0.1 kg Test standards EMC: CE, FCC, EN 55032/24 EMI: CISPR 32, FCC Part 15B Class A EMSiEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV VibrationeN 60068-2-6 Shock: EN 60068-2-27 Free Fall: EN 60068-2-32 Interfaces Copper ports 1x10/100/1000BaseTX, RJ45 Auto negotiation Auto MDI/MDI-X Full/half duplex Fibre optic ports 1 x 100/1000 SFP, LC connector Data rate of the SFP must be set via dipswitch. We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested by us and is not guaranteed. Network features PoE management Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure Types/features PC-MC101-GE For SFP slot LC connector Optical data dependent on SFP Incl. mounting accessories, without SFP, without power supply Mounting accessories Supplied mounting accessories for wall and DIN rail mounting

This industrial media converter was specially developed for applications with high data loads, such as video over IP. The very compact design, the wide temperature range and the high flexibility make this media converter ideal for remote locations. The media converter has a copper port with 10/100/1000TX, which supports PoE 802.3af/at up to 30W. By using SFPs with 100 or 1,000 MBit/s, the PC-PMC101-GME can be connected to practically all common central switches. The supplied mounting accessories make it easy to mount the media converter on a top-hat rail or on a wall. Further information Special features LFP (Link Fault Pass Through) can be switched on and off using a dip switch. For stable use of this function, a suitable media converter from the PC series must also be used on the opposite side. System notesThis media converter cannot be operated in combination with the VDSL-SFPs of the PD-VDSL-SFP series . Technical data General properties Supply voltage 48-56VDC, screw terminal Without power supply unit, must be ordered separately Power consumption 2W, without PoE MTBF Operating temperature -40°C to +75°C Dimensions 59 x 36 x 50mm (WxHxD) Weight 0.1 kg Test standards EMC: CE, FCC, EN 55032/24 EMI: CISPR 32, FCC Part 15B Class A EMSiEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV VibrationeN 60068-2-6 Shock: EN 60068-2-27 Free Fall: EN 60068-2-32 Interfaces Copper ports 1x10/100/1000BaseTX, RJ45, PoE+ Auto negotiation Auto MDI/MDI-X Full/half duplex Fibre optic ports 1 x 100/1000 SFP, LC connector Simplex or duplex depending on the SFP Data rate of the SFP must be set via dipswitch We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not checked by us and is not guaranteed. Network features PoE management Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af for POE IEEE 802.3at for POE+ Types/features PC-PMC101-GME For SFP slot LC connector Optical data dependent on SFP Incl. mounting accessories, without SFP, without power supply Mounting accessories Supplied mounting accessories for wall and DIN rail mounting

This industrial media converter was specially developed for applications with high data loads, such as video over IP or video streaming. The high possible PoE power of 90W makes this media converter suitable for components with high power requirements. The compact design, wide temperature range and high flexibility make this media converter ideal for remote locations. The media converter has a optical SFP port and a copper port with 1G/10GTX, which supports PoE 802.3af/at/bt up to 90W. With the supplied mounting accessories, the media converter can be easily mounted on a top-hat rail or on a wall. Further information Special features LFP (Link Fault Pass Through) can be switched on and off using a dip switch. For stable use of this function, a suitable media converter from the PC series must also be used on the opposite side . Technical data General properties Supply voltage 12-56VDC without PoE 48-56VDC with PoE 52-56VDC with PoE++ (from 30W) Redundant power supply possible Power consumption Max. 4W, without PoE MTBF Operating temperature -40°C to +75°C Dimensions 104 x 32 x 82mm (HxWxL), all dimensions without connector Interfaces Copper ports 1 x 1G/10G TX with PoE++, RJ45 PoE according to IEEE802.3af, at and bt, max. 90W Distance specification Copper port Data rate 1G: max. 100m, cable min. Cat5 or better Data rate 10G: max. 50m, cable min. Cat6a or better Fibre optic port Depending on SFP Fibre optic ports 1 x 1G/10G BaseFX with SFP/SFP+ LC duplex or simplex depending on SFP We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested or guaranteed by us. Uplink ports 1 x 1G/10G SFP/SFP+ Network features PoE management Security FCC Class A, CE Standards 802.3, 10Base-T Ethernet 802.3u, 100BaseTX and 100BaseFX Fast Ethernet 802.3ab 1000BaseTX, Gigabit Ethernet EN55022/24, ITE equipment EN60950-1, Safety EN50155 / EN60068-2-6, Vibration EN50155 / EN60068-2-27, Shock EN50155 / EN600-2-32 Free fall IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV Types/features PC-BTPMC101-10GE Without SFP Without power supply PoE, PoE+ and PoE++ up to 90W Mounting accessories incl.

This industrial media converter was specially developed for applications with high data loads, such as video over IP or video streaming. The high possible PoE power of 90W makes this media converter suitable for components with high power requirements. The compact design, wide temperature range and high flexibility make this media converter ideal for remote locations. The media converter has a optical SFP port and a copper port with 10/100/1000TX, which supports PoE 802.3af/at/bt up to 90W. The supplied mounting accessories allow the media converter to be easily mounted on a top-hat rail or on a wall . Further information Special features LFP (Link Fault Pass Through) can be switched on and off using a dip switch. For stable use of this function, a suitable media converter from the PC series must also be used on the opposite side. Technical data General properties Supply voltage 12-56VDC without PoE 48-56VDC with PoE 52-56VDC with PoE++ (from 30W) Redundant power supply possible Power consumption Max. 4W, without PoE MTBF Operating temperature -40°C to +75°C Dimensions 104 x 32 x 82mm (HxWxL), all dimensions without connector Interfaces Copper ports 1 x 10/100/1000TX with PoE++, RJ45 PoE according to IEEE802.3af, at and bt, max. 90W Fibre optic ports 1 x 100/1000BaseFX with SFP LC duplex or simplex depending on SFP We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested or guaranteed by us. Uplink ports 1 x 100/1000SFP Network features PoE management Security FCC Class A, CE Standards 802.3, 10Base-T Ethernet 802.3u, 100BaseTX and 100BaseFX Fast Ethernet 802.3ab 1000BaseTX, Gigabit Ethernet EN55022/24, ITE equipment EN60950-1, Safety EN50155 / EN60068-2-6, Vibration EN50155 / EN60068-2-27, Shock EN50155 / EN600-2-32 Free fall IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV Types/features PC-BTPMC101-GE Without SFP Without power supply PoE, PoE+ and PoE++ up to 90W Mounting accessories incl.

This industrial media converter was specially developed for applications with high data loads, such as video over IP or video streaming. The compact design, the wide temperature range and the high flexibility make this media converter ideal for remote locations. The media converter has a optical SFP port and a copper port with 10/100/1000TX, which supports PoE 802.3af/at up to 60W. With the supplied mounting accessories, the media converter can be easily mounted on a top-hat rail or on a wall. Technical specifications General properties Supply voltage 12-56VDC without PoE 48-56VDC with PoE Power consumption Max. 4W, without PoE MTBF Operating temperature -40°C to +75°C Dimensions 104 x 32 x 82mm (HxWxL), all dimensions without connector Interfaces Copper ports PC-PMC101-GE: 1 x 10/100/1000TX with PoE+ PC-HPMC101-GE: 1 x 10/100/1000TX with PoE++ Fibre optic ports Connectors: Copper: RJ45, fibre optic, LC duplex or simplex depending on SFP We recommend the use of our barox SFPs. The compatibility of our devices with SFPs from other manufacturers is not tested by us and is not guaranteed. Uplink ports 1 x 100/1000SFP Network features PoE management Security FCC Class A, CE Standards 802.3, 10Base-T Ethernet 802.3u, 100BaseTX and 100BaseFX Fast Ethernet 802.3ab 1000BaseTX, Gigabit Ethernet EN55032/24, ITE Equipment EN60950-1, Safety EN50155 / EN60068-2-6, Vibration EN50155 / EN60068-2-27, Shock EN50155 / EN600-2-32 Free fall Types/features PC-HPMC101-GE Without SFP Without power supply PoE, PoE+ and PoE++ up to 60W PC-PMC101-GE, see separate data sheet Without SFP Without power supply PoE and PoE+ up to 30W Mounting accessories

This industrial PoE splitter allows a separate DC voltage of 12 or 24VDC to be provided in addition to a IP data interface with PoE+. For example, in addition to a PoE-powered IP camera , a separate light source or a separate heater can also be supplied. The small dimensions and wide operating temperature range make the device particularly suitable for installation in outdoor locations. Technical specifications General properties Supply voltage PoE+ / PoE++ (PD), max. 60W Power consumption Max. 60W MTBF Operating temperature -40° to +75°C Dimensions 74 x 54 x 35mm (LxWxH) Weight 0.15 kg Interfaces Copper ports 1 x 10/100/1000TX, RJ45, Data & PoE IN (PD), max. 60W 1 x 10/100/1000TX, RJ45, Data & PoE OUT (PS), max. 60W Network features PoE management Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3af for POE IEEE 802.3at for POE+

This industrial voltage converter increases an input voltage of 9-36VDC to a voltage of 48-55VDC suitable for PoE and PoE+. This allows, for example, PoE injectors or media converters to be supplied at locations where only voltages between 9-36VDC are available. The voltage converter is suitable for wall or top-hat rail mounting. Its small dimensions and wide operating temperature range make it particularly suitable for outdoor use. Technical specifications General properties Supply voltage 9-36VDC, screw terminals Power consumption Depending on the supplied sink Max. 480W MTBF Operating temperature -40° to +75°C Dimensions 38 x 95 x 75mm (WxHxD) Weight 0.45kg Test standards Safety: CE EN55035/EN61000-6-2 IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT) IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field) Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free Fall: EN 60068-2-32 Network features PoE management Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af for POE IEEE 802.3at for POE+ Types/features PS-DIN-DC12/48/480 Mounting accessories Supplied Mounting accessories for wall and top-hat rail mounting

This industrial voltage converter increases an input voltage of 24VDC to a voltage of 48-55VDC suitable for PoE and PoE+. This allows, for example, PoE injectors or media converters to be supplied at locations where only 24VDC is available. The voltage converter is suitable for wall or top-hat rail mounting. Thanks to its small dimensions and wide operating temperature range, it is particularly suitable for outdoor use. Technical specifications General properties Supply voltage 24-56VDC, screw terminals Power consumption Depending on the supplied sink Max. 72W MTBF Operating temperature -40° to +75°C Dimensions 59 x 36 x 50mm (WxHxD) Weight 0.1 kg Test standards Safety: EN60950-1 Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free Fall: EN 60068-2-32 Network features PoE management Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af for POE IEEE 802.3at for POE+ Types/features PS-DIN-DC24/48/72 Mounting accessories Supplied Mounting accessories for wall and top-hat rail mounting

The extenders of the UP-EXT-SET series transmit 10/100Mbps Ethernet and PoE/PoE+ via coaxial cables or twisted-pair UTP cables up to a distance of 300m. The devices are supplied and used in pairs, the UP-EXT-CAM on the camera side, the UP-EXT-SERV on the server side. The extenders enable the PoE supply, e.g. of a midspan, to be passed on directly via coaxial or UTP cable . Power is supplied via PoE or via a power supply unit on the centre side. The devices do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The individual devices can be mounted on a panel using a pair of supplied retaining flanges or up to 16 devices can be mounted on 2U using the 19" subrack UP-R2, which must be ordered separately. Further information System notesConnecting several device pairs via the same UTP cable can lead to transmission problems due to crosstalk between the different signals in the cable. Ideally, each device connection should therefore be realised via separate cables. If several cables have to be strung together on a connection route, it is important to realise these transitions as technically well as possible. This means that, ideally, professionally assembled RJ45 plugs are used for the transitions. If this is not possible, e.g. when using telephone cables, care must be taken to minimise unwinding the stranding of the wire pairs. The contact between the cores of the cables to be connected must be as galvanically good as possible. Shielded UTP cables can cause problems due to potential equalisation currents . We recommend not earthing the shields in the control centre, especially when several cables are brought together in a control centre. Technical data General properties Supply voltage Power supply via PoE or Power supply with 48-56VDC on the centre side, barrel connector 2.5 / 5.5mm Power consumption approx. 2W without PoE MTBF Operating temperature UP-EXT-CAM: -40 to +55°C UP-EXT-SERV: 0 to +55°C Dimensions 82 x 25 x 63mm, LxWxH, Dimensions without connector Weight 0.14kg per device Interfaces Copper ports 1 x 10/100BaseT, RJ45, Poe and PoE+ The PoE power available on the camera side is heavily dependent on the cable length and the cable quality. By increasing the PoE voltage on the centre side up to the maximum permitted 56VDC the camera-side power can be increased. Extender ports The UP-EXT-SET devices allow the connection via data cable Cat5e or better, via coaxial cable or via twisted pair cables such as telephone cables. Accordingly, both interfaces are also available on the extenders. The supplied BNC to two-wire terminal adapter is used for transmission via telephone cable . Important: Only one of the interfaces can be used at a time. Transmission via coaxial cable: BNC socket (female) Transmission via telephone cable: BNC socket and supplied adapter Transmission via data cable: RJ45 socket Transmission cable Data cable Cat5e or better, via RJ45 socket Coaxial cable, via BNC socket Paired cable, e.g. telephone cable, via BNC socket and BNC to two-wire adapter Distance specification The maximum transmission distance when using the cable types mentioned above is approx. 300m The maximum Data rate is between 90MBit/s and 10MBit/s The possible data rate depends on the length of the line, the cable type, the wire cross-section and the cable quality. The following parameters have a positive effect on the possible data rate: Short cable length, high-quality cable type (coax > Cat7 > Cat6 > Cat5e > telephone cable), large wire cross-section. The PoE power available at the camera end available at the camera end PoE power decreases continuously as the length of the cable increases. The available PoE power also depends on the wire cross-section . Coaxial cables have small wire cross-sections. Data cables are available with different wire cross-sections. The AWG number describes the core cross-section. The smaller the AWG number, the larger the wire cross-section. The PoE input voltage has a major influence on the available PoE power. If possible, the voltage should be set as high as possible, maximum 57VDC. With coaxial cables, the maximum PoE power after 200m is less than 10W. For Cat7 cables with AWG24, the maximum PoE power after 200m is approx. 20W. Network properties PoE management Standards Compatible with several network protocols including IEEE802.3, 802.3u, 802.3x Supports jumbo frames Tag transparent Types/features Mounting bracket supplied BNC to 2-wire adapter supplied The adapter can be used to transmit IP and PoE with a twisted-pair two-wire cable. UP-R2 19" subrack for max. 16 flush-mounted EXT devices, 2U To be ordered separately